Compressive tubular bandage for support and rehabilitation

Lidergrip® is made from ecru 100% cotton knitted tubular fabric and an elastomer covered with a double layer of polyester, inserted into the fabric forming a continuous and independent spiral. This construction provides transverse elasticity and an elastic-compressive effect, with recovery capacity to maintain compression during application.

• Elastic compressive tubular bandage for support and rehabilitation.
• Uniform and prolonged pressure on the part of the body where it is applied.
• Transversely elastic and compressive fabric due to the recovery capacity of the elastomer.
• Elastic-compressive effect; washable and sterilizable according to the technical data sheet.
• Available in 11 sizes for different anatomical areas, from children’s limbs to extra-large trunks.
• Presented in a 10-metre roll.
• Available in a latex version and a latex-free version.

• Support and rehabilitation bandages on upper and lower limbs.
• Tubular compression applications on wrists, ankles, arms, legs, thighs and trunk, according to selected size.
• Professional use in hospitals, clinics, orthopaedic centres, rehabilitation, sports medicine and medical distribution.
• Suitable for protocols requiring homogeneous compression and fast tubular bandage application.
• Size selection according to anatomical area, perimeter and level of coverage required by the professional.

• Made with artificial elastomer.
• Fully hypoallergenic according to the technical data sheet.
• Maintains compressive effectiveness to provide suitable support and rehabilitation bandages.
• Recommended option when avoiding latex components in the product is required.

• Select the size according to the anatomical area and patient perimeter, following the size guide and the judgement of the healthcare professional.
• Ensure even application of the bandage to maintain uniform pressure and avoid folds or areas of localised pressure.
• Choose the latex-free version when contact with latex must be avoided due to sensitivity, allergy or centre protocol.
• Non-sterile, single-use product; use according to professional instructions and applicable protocols.
• Store between 5 °C and 30 °C, protected from conditions that could alter its characteristics.

Lidergrip® is presented in 11 sizes identified by letters. The following table groups the size guide and applications to facilitate professional selection of the appropriate format.

The range is marketed in latex-free and latex versions. Each size has a specific reference and its corresponding unit EAN 13 / UDI-DI.